Common Nitronic 60 Stainless Steel Specifications & Heat Treatment
| Grade | Nitronic 60 Stainless Steel |
|---|---|
| Common bar standards | ASTM A276 or ASTM A479 for qualifying Nitronic 60 / UNS S21800 stainless bar. |
| Heat treatment / supply condition | Often solution annealed or cold worked; not a conventional precipitation-hardening steel. |
| Precision finishing | Specify finished OD and limits, rod length and quantity, straightness, roughness, hardness, and required documents. |
Confirm galling/wear suitability and supplied condition separately.
Typical standards and conditions are purchasing references only, not a stock/certification or in-house heat-treat promise. Confirm supplied product form, condition and any externally coordinated thermal treatment in the written RFQ.
ANTI-GALLING AUSTENITIC STAINLESS • MATERIAL GRADE BUYING GUIDE
Nitronic 60 Stainless Steel precision ground rod stock — Nitronic 60 (UNS S21800) is a nitrogen-strengthened stainless designed for resistance to galling in certain metal-to-metal contact conditions.
Nitronic 60 Stainless Steel Rod Material and Specification
For this grade, the important question is not simply whether a rod is offered as “precision ground.” Buyers should define the material identity, the intended delivery condition and the acceptance requirements. Confirm UNS S21800 and the drawing-specified bar standard.
Condition and Processing Considerations
Provide hardness/condition and any surface-roughness requirements for mating parts.
Where Nitronic 60 Stainless Steel Rod Stock May Be Considered
Valve stem components, bushings, pins and other sliding hardware with engineer-approved contacts.
The required rod diameter and finish must be consistent with the final manufacturing process. Ground stock may be appropriate for selected machining or shaft-preparation workflows, but the final component design determines whether the grade, microstructure and surface condition are suitable.
Nitronic 60 Stainless Steel Centerless Ground & TG&P Bar Options
Nitronic 60 Stainless Steel Centerless Ground Bar
For Nitronic 60 Stainless Steel centerless ground rods and bars, galling-resistant Nitronic 60 may be requested for guide or wear interfaces, where OD finish and bar straightness matter. See centerless grinding services for the OD finishing route.
Nitronic 60 Stainless Steel TG&P / Turned, Ground & Polished
If your RFQ calls for Nitronic 60 Stainless Steel TG&P (TGP) or turned, ground and polished bar, confirm whether actual turning, grinding and polishing are called for when sourcing Nitronic 60 TG&P bar. Learn about shafting and bar sourcing and surface polishing.
Centerless-ground material is not necessarily TG&P. Grade, supplied condition, turning requirements, final OD, straightness, finish and availability are confirmed by quotation. Request a quote →
What to Verify Before Ordering
Resistance to galling is application-dependent; grinding finish alone cannot establish component friction or wear life.
- Finished outside diameter: state the size and exact upper/lower OD limits, not just a nominal inch or millimeter dimension.
- Lengths and quantity: give the bar length or cut length, end requirements, number of pieces and requested shipment schedule.
- Material condition: include the specified grade, applicable product standard, heat-treatment or hardness state and certification requirements.
- Inspection: specify straightness with a measurement span, roundness, surface roughness and traceability where your application calls for them.
Supply, OD Grinding and Quote Requirements
Precision Ground Rods provides grade-specific sourcing and precision bar processing quotations. Depending on the grade, condition, diameter and length, material supply may be combined with outside-diameter grinding, straightening, polishing, cutting and packaging. These capabilities are evaluated for each RFQ; this page does not promise a standard stocked size or a universal grinder tolerance.
For a useful Nitronic 60 Stainless Steel inquiry, attach the purchase specification and drawing and indicate whether you need finished ground rod stock or want customer-owned stock processed. Include the quantity, delivery destination and inspection plan so the quotation can address all relevant requirements.
Browse all rod material grades to compare other chemistries and product forms. Verify any material substitution with engineering.
General purchasing information, not a certified material test report or an approval for regulated service. All material properties, dimensions and certificates must be confirmed in the written quotation.
